When it comes to plastering, there are a few common mistakes that can end up costing you time and money.
Here are 12 of the most common mistakes when plastering:
1. Not Getting The Right Supplies
You can’t plaster without the right supplies! Make sure to get all of the necessary materials before starting your project. Otherwise, you’ll just be frustrated and waste time.
2. Skipping The Prep Work
Preparing the surface is one of the most important steps of plastering. If you skip this step, your plaster will not adhere properly and will not look its best.
3. Not Cleaning The Walls First
One of the most common mistakes people make when plastering is not cleaning the walls first. If there is any dirt or debris on the surface, it will prevent the plaster from adhering properly and can create an uneven finish. Be sure to clean the walls thoroughly before beginning your project.
4. Not Applying A Primer
Another common mistake is skipping the primer step. A primer helps the plaster to adhere better and provides a smoother surface for you to work with. Without a primer, you are more likely to end up with an uneven finish.
5. Not Applying Enough Pressure
When applying plaster to the wall, it is important to apply enough pressure. If you do not apply enough pressure, the plaster will not adhere properly and can create an uneven finish. Be sure to use even pressure when applying the plaster to avoid this mistake.
6. Not Applying Enough Plaster
Another common mistake is not applying enough plaster to the wall. This can create an uneven finish and make it difficult to smooth out the surface. Be sure to apply a generous amount of plaster to the wall to avoid this issue.
7. Not Letting The Plaster Dry Completely
If you try to paint or wallpaper over wet plaster, it will not adhere properly and can create an uneven finish. Be sure to let the plaster dry completely before painting or wallpapering over it.
8. Not Sanding The Surface
Once the plaster has dried, it is important to sand the surface before painting or wallpapering. If you do not sand the surface, the paint or wallpaper will not adhere properly and can create an uneven finish. Be sure to use fine-grit sandpaper to avoid damaging the plaster.
9. Not Applying Paint Or Wallpaper Evenly
When painting or wallpapering over plaster, it is important to apply the paint or wallpaper evenly. If you do not apply the paint or wallpaper evenly, it can create an uneven finish. Be sure to use even strokes when applying the paint or wallpaper to avoid this mistake.
10. Not Caulking The Joints
If you are painting or wallpapering over plaster, it is important to caulk the joints. Caulking the joints will help to prevent paint or wallpaper from seeping through and can create an uneven finish. Be sure to use a good-quality caulking compound to avoid this mistake.
11. Not Applying Sealant
Once the paint or wallpaper has been applied, it is important to apply a sealant. A sealant will help to protect the paint or wallpaper from damage and can also create a more polished look. Be sure to use a good-quality sealant to avoid this mistake.
12. Not Cleaning Up After Yourself
One of the most common mistakes people make when plastering is not cleaning up after themselves. If you do not clean up your work area, it can create an uneven finish. Be sure to clean up your work area after each session to avoid this mistake.
If you avoid these common mistakes, your plastering project will go much smoother and you’ll be happy with the results.
If you want to hire a plastering company, check out Plastering National.